Pair your tractor with the Tree Hog, the highest quality tree cutter and stump remover on the market.
Clear trees, stumps, brush, and even fence posts—so you can make the best of your land.
- Cut More: The Tree Hog fells trees up to 20″ in diameter in a single cut.
- Superior Control: 7′ hydraulically operated pusher for directional felling.
- Total Leveling: Cuts trees off 1″ below ground level.
- Multipurpose: The pusher bar removes easily to create a low-profile cutter for clearing fence lines and hedge rows.
- No More Stumps: Quickly and easily cuts existing stumps 1″ below ground level, or will grind any size stump of any type of wood to 1″ below ground level.
Why the Tree Hog?
Superior performance and value
Unparalleled power and directional control
Quality American-made construction
Stability, safety, and reliability
Manufacturer guaranteed!
durability
- Heavy-duty cutting wheel: A 40″ or 48″ diameter wheel of 3/4″ A-36 steel plate.
- Carbide cutting bits will remove hundreds of trees between resharpening. Easily and quickly exchanged, replaced, or sharpened.
- The extra-heavy is designed to withstand the punishment of continuous commercial tree cutting.
- Double-acting tie rod cylinders rated for 2500 PSI.
safety
- Smooth operation: The hydraulically fed cutting wheel assures a well-controlled and non-violent cut into trees or stumps.
- Heavy steel skirts prevent flying chips and debris.
- The entire cutting wheel is contained within a shroud when not cutting.
- The limiter clutch protects the entire drive system.
- A hydraulically controlled pusher bar assists in directional felling.
features
- Hydraulic cylinders move the wheel out to cut stumps for smooth, controlled operation.
- A hydraulically operated pusher bar assists the felling of a tree. Removes easily for cutting under fence lines or hedge rows.
- Four friction disc limiter clutches protect machinery and tractor.
- Rugged 3″ x 3″ x 1/4″ wall square tube steel frame.
- Extra heavy-duty gearbox rating at 75 or 120 H.P.; suited for commercial users.
- A 40 x 3/4″ plate or 48″ x 3/4″ plate steel wheel is hydraulically fed into the tree for a smooth, well-controlled cut and retracts into the shroud for safety.
- Heavy welded steel skirts enclose the wheel and prevent flying debris.
- Adjustable skids for cutting heights.
two models available
TREE HOG 40
The original Tree Hog
$8,895
FOB Houston
TREE HOG 48
New and improved model
$10,895
FOB Houston
Specifications
Operating RPM (PTO)
Min. PTO H.P.
Cutting Capacity
Gearbox
Three-Point Hitch Category
Cutting Depth (Single Cut) Horizontal
Max. Stump Removal
Cutting Bits
Cutting Wheel
Weight
Tree Hog 40*
Operating RPM (PTO): 540
Min. PTO H.P.: 40
Cutting Capacity: 1" below ground level
Gear Box: 75 H.P.
Three-Point Hitch Category: Category 1 & 2
Cutting Depth (Single Cut, Horizontal): 16"
Max. Stump Removal: Any Size
Cutting Bits: 10 (Carbide)
Cutting Bits Type: Bolt-on—can be re-sharpened
Cutting Wheel: 41" dia. x 3/4" plate
Weight: 1150 lbs.
Tree Hog 48
540
85
1" below ground level
120 H.P.
Category 2
20"
Any Size
10 (Carbide)
Bolt on – can be re-sharpened
48" dia. x 3/4" plate
1550 lbs.
*Ask about our high-torque versions of Tree Hog 40 for tractors under 50 HP.
Warning: Do not cut trees without adequate overhead driver protection from falling limbs or the “fallback” of trees.
quality guarantee
The Tree Hog is the best choice for your bottom line, and it carries a factory warranty. We are an OEM company selling directly to consumers, saving you money. We manufacture extremely reliable equipment that requires very little maintenance. Every piece we produce is high quality and equipped with features to assure the protection of your equipment and tractor, regardless of the tractor horsepower or hydraulic output. These include pressure-regulating valves and power takeoff shafts, having a factory-set, fully enclosed friction disk clutch. All machines leave our facilities fully greased and lubricated.
Contact Us